Raisecom Switch basic configuration | full configuration of Raisecom switch | ISCOM2110EA-MA-WP-01,

basic full configuration of raisecom switch

how to getting start basic configuration of raisecom switch

how to create vlan in any switch
cisco networking
cisco switch configuration step by step in hindi

The specific configuration steps for a Raisecom switch can vary depending on the model and software version. However, here are some general steps that can be followed to configure a Raisecom switch:

Connect to the switch: Connect a PC or laptop to the switch using a console cable or Ethernet cable. Use a terminal emulator program, such as PuTTY or HyperTerminal, to establish a console session to the switch.

Enter configuration mode: Enter the configuration mode by typing "enable" and entering the enable password if prompted.

Configure basic settings: Configure basic settings such as the hostname, domain name, and management interface IP address using the "hostname," "ip hostname," and "interface" commands.

Configure VLANs: Configure VLANs using the "vlan" command. Assign switch ports to specific VLANs using the "interface" command followed by "switchport mode access" and "switchport access vlan" commands.

Configure STP: Configure Spanning Tree Protocol (STP) to prevent loops in the network using the "spanning-tree" command.

Configure link aggregation: Configure link aggregation using the "link-aggregation" command. This allows multiple physical links between switches to be combined into a single logical link for increased bandwidth and redundancy.

Configure Quality of Service (QoS): Configure QoS settings such as traffic classification, policing, and shaping using the "qos" command.

Save the configuration: Save the configuration changes using the "write" or "copy running-config startup-config" command.

These are some general steps that can be followed to configure a Raisecom switch. However, it is important to refer to the specific switch documentation and software version for detailed configuration instructions
#how #howto #tutorial #configuración #configuration #bestone #learning #coding #hindi #urdu #qos #cisco #hp #switch #router #service #vlan #configure