ESP32 Cam based Motion Triggered Image Capturing Device

Project Page:https://electronicsinnovation.com/esp...


In this tutorial, we are going to make an ESP32 Cam based Motion Triggered Image Capturing Device with PIR Motion Sensor. we will accommodate all the components on the Vero board and connect them with the soldering lines. This device will send a captured image to a pre-programmed email. This will also save a copy of the captured image in onboard Micro SD Card of ESP32- cam.
As soon as motion detected, the intermediate circuit will trigger an interrupt to wakeup the ESP32 from Deep Sleep mode.


Required components:
1. ESP32 Camera                        https://amzn.to/2Z7fXJx
2. Micro Sd Card                        https://amzn.to/3emPiie
3. FTDI Programmer Module     https://amzn.to/2AMkmcG
4. PIR Motion Sensor                 https://amzn.to/2V2ngAQ
5. NPN Transistor                       https://amzn.to/3ehOgDW
6. 1k and 10k Resistors             https://amzn.to/30ZBuX1


=================================================

Subscribe to Electronics Innovation
http://bit.ly/ElectronicsInnovation

Visit Electronics Innovation.com for more Tutorials, Tips, Projects, and How It Works videos:
http://electronicsinnovation.com/

Like my page on Facebook:  / electroniczinnovation  

~-~~-~~~-~~-~
Please watch: "I AM IRON MAN | DIY Arc Reactor"
   • how to make iron man arc reactor | di...  
~-~~-~~~-~~-~