Automate Using Your Probe! Make the Most of Your Probe with Macros – Haas Automation Tip of the Day

Your probe does a lot more than just set Tool and Work Offsets, it can also be used to perform in-process inspection. And with some simple macro programming, you can take those dimensional values and do things like have your machine display an alarm if a part is out of spec, re-machine a part to get it in tolerance, even mill identifying marks into your part. All of these features are standard when you have probing on your Haas, and the macro programming is much simpler than you probably thought. Don't be scared away by the thought of macro programming, as usual Mark makes it easy!

Bonus Content: https://www.haascnc.com/video/Video-B...

Past Tip of the Day video links:

Run More Than One Part at a Time; How Production Shops Use M97
   • Run More Than One Part at a Time; How...  

Limiting Block Look-Ahead when using Macros
   • Limiting Block Look-Ahead when using ...  

In-Process Part Measurement; Probing in 5 Simple Steps
   • In-Process Part Measurement; Probing ...  

Easily Create Your Own Custom M and G Codes
   • Easily Create Your Own Custom M and G...  

Easily keep track of your parts using the Haas M30 counters
   • Easily keep track of your parts using...  


Don’t miss any TIP-OF-THE-DAY videos. Click here https://www.haascnc.com/about/Newlett... to join our email list!

If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!

Follow Haas:
Facebook –   / haasautomationinc  
Instagram –   / haas_automation  
Twitter –   / haas_automation  
LinkedIn -   / haas-automation