Change Your Alfa Romeo Giulia Stelvio Brakes without ERRORS. Easy DIY 2.0 Maintenance

How to complete the installation of new brake pads on a Giulia 2.0T with no error codes on the dash from the ABS. SAVE MONEY!! PADs are EBC Ultimax2 from Madness Autoworks
https://madnessautoworks.com/start-sh...
Follow instructions below for no computer program needed installation. If doing rear just replace step 3. With rear brake replacement steps and service mode is not needed for just the front.
1. Enter service mode via infotainment
2. Disconnect battery in rear via quick negative disconnect.
3. Change brakes (open brake fluid reservoir, remove 2 pins, unbolt 2 T55 bolts holding caliper, carefully remove caliper then pads, unplug wear sensor, install new pads, reinsert pins, reconnect wear sensor, bolt caliper back on)
4. PUMP your brakes before reconnecting battery or you will have abs errors.
5. Reconnect battery, turn on car ignition only! if service doesn't exit follow step 6.
6. Exit service mode via infotainment by toggling up and down parking brake.
7. Start car, turn wheel all the way left and all the way right, then turn off and on.
8. Follow pad instructions for bedding procedure.

Credit for instructions Giulia Forums.

To buy great brake products for your maintenance I recommend Madness Autoworks
Use my link to support the channel!

https://madnessautoworks.com/?trackin...

Thanks