2004 E46 325Ci Getrag Clutch Replacement

In this video, I will explain transmission removal and installation in order to replace a badly worn-out clutch on a 2004 325Ci BMW. This video will be specific to the Getrag 5-speed transmission but will be very similar if you have a ZF manual transmission.

Parts:
Luk Clutch Kit: https://www.rockauto.com/en/moreinfo....
Exhaust Gasket: https://www.ecstuning.com/b-elring-pa...
Giubo: https://www.ecstuning.com/b-uro-parts...
Transmission Mount: https://www.ecstuning.com/b-lemforder...
Release Bearing: https://www.fcpeuro.com/products/bmw-...
Selector Rod Washer: https://www.fcpeuro.com/products/bmw-...
Pilot Bearing: https://www.fcpeuro.com/products/bmw-...
Flywheel Bolt: https://www.fcpeuro.com/products/bmw-...
Pressure Plate Bolt: https://www.fcpeuro.com/products/bmw-...


00:00 - Start
03:09 - Remove Exhaust
05:55 - Fix Broken Exhaust Bolts
08:40 - Remove Drive Shaft
09:02 - Remove Shift Linkage
09:59 - Remove Slave Cylinder
11:05 - Remove Transmission
14:20 - Remove Bell Housing Internals
15:07 - Install Bell Housing Internals
16:05 - Remove Clutch & Flywheel
18:21 - Install Flywheel & Clutch
23:17 - Install Transmission
26:25 - Install Slave Cylinder
26:56 - Install Shift Linkage
31:53 - Install Giubo
32:37 - Install Drive Shaft
33:36 - Install Exhaust
36:00 - Final Thoughts