Скачать или смотреть Lowering Cost, Raising Efficiency | Screw Plug | Heat Exchanger

#ScrewPlugHeatExchanger #HeatExchanger #Prototype

The Added Steel Screw Plug is our proprietary technology, based on FE analysis for minimising bell-mouthing on the threaded region of the channel barrel.

We conduct all our experiments on a prototype designed by us. All exchangers we manufacture are based on this prototype.
Recently, we developed the fixture which not only unscrews the plug but holds it in the desired position for the tube bundle to be brought out, serviced, re-inserted, and the plug screwed back.
It is the smoothest and quickest to service in a shut-down, thereby saving time and bringing down the cost of maintenance.

The Screw Plug Hi-Hi construction is simple to manufacture, the safest and the most efficient.
This technology cannot be transferred because it is proprietary in nature and, as such, there are no standards available so far.
However, standards can be established if the technology and the standards followed by the owners of proprietary equipment - not the licensees - is shared.

By doing so, the client can be in a much better position to know what they are buying. This technology is in keeping with our philosophy of lowering the cost and raising efficiency.


Haresh Sippy, Chairman, CMD & Chief Founder of Tema India Ltd is an engineering graduate with more than 40 years of experience in the field of Shell & Tube Heat Exchangers; he has pioneered the technology of rolling Titanium Tubes at the invitation of BAPCO, a large size refinery in Bahrain.

Follow him on twitter to know more:   / hareshsippy  

Connect with him on LinkedIn:   / hareshsippy  

Follow him on Facebook:   / hareshksippy  

Follow his company page (Facebook):   / tema-india-181252115271514  

Visit his blog: http://www.hareshsippy.com

Follow his showcase page: https://www.linkedin.com/company/engi...

He has developed the proprietary technology on the threaded closure of the Screw Plug Exchanger which is patented.

He was the first to develop a software and used it to do thermal design + mechanical design + fabrication drawings in a PC.


Video edited by: Tushar More