Watch This to Before Installing Your 12K Upgrade Kit

🎉Upgrade your Sonic Mighty 8K to 12K: https://phrozen3d.net/NjRI3!

Experience the capability of 12K printing now: achieve effortless higher printing quality just by replacing a few key components. The Phrozen ACF Film paired with the new firmware from the new 12K mainboard will reduce your printing time and increase printing efficiency to achieve successful prints each time.

In this video, we will show you how to upgrade your Sonic Mighty 8 K printer parts into 12K and how to change your release film to the new ACF film.

Learn more about the 12K Upgrade Kit: https://phrozen3d.net/NjRI3

Please DO NOT refresh your Sonic Mighty 8K’s firmware after installing your 12K Upgrade Kit. You can download the new 12K firmware on Phrozen Website.
**The LCD test in this tutorial video uses the Mighty 8K for demonstration purposes. After installing the Mighty 12K Upgrade Kit, the LCD test results may differ from the actual performance. As long as the test functions are successfully completed, it indicates a successful installation.

📌Click on the time stamp below to review each section:
00:00 Unboxing
00:08 What's in the upgrade kit?
00:28 Procedure preview
00:56 Remove the case
01:39 Change the LED driver
03:08 Remove the mainboard
04:39 Remove the LCD panel
05:03 Install the mainboard
06:23 Setting up the LCD panel
07:47 Perform the hardware test
09:29 Install the case back
10:00 Replacing the ACF film
11:44 Change the 8K label into the 12K

We hope you have an incredible 3D printing journey with your new 12K printer!

Follow us on Facebook ➜https://phrozen3d.net/CF9rN
Instagram ➜ https://phrozen3d.net/i77kS
TikTok➜https://phrozen3d.net/2zPmd
Twitter➜ https://phrozen3d.net/OrFF2

#LCD3DPrinting #Mighty8K #Mighty12K #UpgradeKit #ACFFilm