Textile DTF 300mm Printer Setup, PrintEXP Alignment Tool and FlexiPRINT Driver Installation

In today’s comprehensive guide, we will walk you through the complete installation process for the DTF 300 Textile Printer setup, the PrintEXP Alignment Tool and FlexiPRINT Driver Installation. This step-by-step tutorial will ensure that you can set up your equipment efficiently and start printing with confidence.

1. Unpacking and Preparation:

Ensure that all components of the DTF 300 printer and baking unit are present and accounted for.
Organize the provided consumables, tools, and accessories for easy access during installation.
2. Installing the DTF 300 Printer:

Begin by assembling the DTF 300 printer, which comes preassembled for your convenience.
Mount the white ink tank securely at the back of the machine using the provided screws.
Connect the ink pipes for the white ink circulation system, ensuring a secure and tight fit.
Install the print heads for both CMYK and white inks, fastening them with the provided screws.
Carefully connect the dampers to the print heads, ensuring proper alignment and orientation.
Pour CMYK and white inks into their respective tanks at the back of the printer.
Use a syringe to bleed the air out of the ink pipes and ensure smooth ink flow.
Connect the head cables, ensuring correct placement and alignment for each print head.
Adjust the ink caps and perform the necessary settings using the printer control software.
3. Printing Setup and Calibration:

Load the printing film onto the printer, ensuring proper alignment and tension.
Set up the printer’s IP address and configure necessary software settings for optimal performance.
Install ICC profiles and drivers for accurate colour management and printing control.
Perform cleaning and nozzle tests to ensure print quality and functionality.
Adjust print alignments and head spaces as needed for precise printing results.
4. Printing and Testing:

Send a test print job to the DTF 300 printer using compatible design software.
Verify the print quality, colour accuracy, and overall performance.
Make adjustments as necessary to optimize printing settings and output.
5. Installing the Baking Unit:

Assemble the baking unit, following the provided instructions and guidelines.
Install the take-up system for handling printed materials, ensuring proper alignment and functionality.
Secure the motor and empty the core onto the baking unit for efficient paper handling.
Connect the power source to the baking unit and ensure all components are ready for operation.
6. Final Checks and Assistance:

Double-check all connections, settings, and components to ensure everything is properly installed.
Seek assistance from technical support if encounter any issues or difficulties during the installation process.

By following this detailed guide, you can successfully install and set up your DTF 300 printer and baking unit for efficient textile printing operations. With proper installation and calibration, you’ll be ready to produce high-quality prints with ease. Should you need further assistance or encounter any challenges, don’t hesitate to reach out to technical support for expert guidance and support. Happy printing!

Machines, Consumables and Parts Available from https://buythis.co.za/

For more info on Advanced Machinery visit https://am.co.za/

Chat with us by sending “hi” on Whatsapp to 060 600 6000​.