INSTALLING THE MAKSPEED TURBO KIT (9th Gen Civic SI)

Makspeed kit was purchased on FB marketplace so i had to make the intercooler piping fit. Other than that this is pretty much everything i used to piece it all together! any questions shoot me a DM on Insta @dc5diego

COUPLERS
2in 90 degree https://a.co/d/hdzfk7f

2.5in 45 degree https://a.co/d/c5rwmQS

2.5in 90 degree https://a.co/d/c7QczmO

__________________________________________

OIL DRAIN/FEED
10AN Turbo Oil Drain Line https://a.co/d/ja274Vl

10 AN Turbo Oil Drain Flange https://a.co/d/aTdKUor

10AN Oil Pan Bung https://a.co/d/2EhXwTb

Turbo Oil Feed Line https://a.co/d/aUQo4i8

This fitting threads to the oil pressure TEE to 4an OIL FEED https://a.co/d/cJFFCz

__________________________________________

FITTINGS/MISC
Barb Fitting For Turbo Tap to Wastgate https://a.co/d/27CecPQ

O2 sensor plug https://a.co/d/1lQR6Hg because makspeed downpipe has an extra slot for possible AFR gauge?

2x 6AN Coolant Block Off For Turbo Fitting https://a.co/d/4YhAPKR

AN Aluminum Wrench https://a.co/d/abbikjC

Vacuum Hoses (For BOV or Boost Gauge Or Wastegate)https://a.co/d/5rlMv5I

Gold Heat Tape https://a.co/d/3MKV70c

__________________________________________

IAT SENSOR https://a.co/d/cu5cEu9

__________________________________________

VACUUM BLOCK SET UP
Vacuum Block https://a.co/d/fsnyn3U

Block Off Fittings For Vacuum Block https://a.co/d/71lPoM8

3/8s Hose For Intake Manufold to Vacuum Block
https://a.co/d/4pCQFgr

3/8s TEE Barb For Intake Manifold https://a.co/d/auNIEbx