How to Replace Steering Angle Sensor 05-10 Chrysler 300

For More Info visit us at: http://1aau.to/h/iY/

In the video, 1A Auto shows how to replace or remove a faulty or broken steering angle sensor. The video is applicable to the 05, 06, 07, 08, 09, 10 Chrysler 300.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

🔧 List of tools used:
• Phillips Head Screwdriver http://1aau.to/ofJ/1AXAA00013
• 10mm Socket http://1aau.to/oeI/1AXAA00017
• T10 Torx Driver http://1aau.to/oaz/1AXAA00008
• Ratchet http://1aau.to/of3/1AXAA00016
• Socket Extensions http://1aau.to/ofr/1AXAA00015
• Torque Wrench http://1aau.to/ode/1AXAA00044
• Gloves http://1aau.to/o7/1AXSS00048
• Wire Ties
• 10mm Allen Wrench http://1aau.to/oj/1AXAA00007

Subscribe:    / @1aauto  

Check out our playlist:
Chrysler 300 2005-10 1st Gen:    • Chrysler 300 2005-10 1st Gen  

For More Info visit us at http://1aau.to/h/iY/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.