DIY for REAR SHOCK ABSORTERS - 160 tkm SERVICE - BMW F20 engine N13

DIY for REAR SHOCK ABSORTERS - 160 tkm SERVICE - BMW F20 engine N13
#RearShockAbsorters #160tkmService #BMWF20 #BMWN13

As in the previous episodes, I do a 160 tkm service for my BMW F20 car
It's time to replace the new rear shock absorbers
Last winter, the shock absorbers froze whenever there was frost
And this caused a shock to the rear of the car, even if it drove a slight unevenness on the road
Remove camber arm cover
Remove the shock absorber lower bolt first.
Note direction of insertion of screw
Release screws on support bearing
Press shock absorber together and remove upward from wheel arch
See how slow the shock absorber returns!
Remove protective cap and check sealing washer for any damage
Release nut. If possible, use the BMW Special Tools 2 355 965 and 2 355 966
I personally use the impact tool
Using an impact machine is a risk of damage inside the shock absorber!
Especially during the tightening phase, make sure that the shock absorber does not rotate
These are worth changing at 160 tkm!
Let's see how the new one has to move
Be careful not to allow the shock absorber to rotate!
Insert protective cap
Next, the shock absorber is back in place
Replace screw and nut. Note direction of insertion of screw

PARTS total cost: 159,48 €
2 x 33526873722: Shock absorber, rear
2 x 07119907372: Torx screw with collar
2 x 33326760668: Self-locking collar nut
2 x 07119907135: Hex nut wiht flange
2 x 33536855439: Additional shock absorber, rear
6 x 07119907137: Torx screw with collar


Let’s continue with the next episode! Stay tuned!

--
Watch this video!
If you liked this video, press the LIKE BUTTON, SUBSCRIBE channel, leave COMMENTS and SHARE video! By doing so, you will be able to support this Youtube-channel!
Thank you! I appreciate it! 👍

Watch my previous videos on Youtube related to the maintenance and diagnose of BMW F20 with engine N13!
See the whole series from here:
   • BMW F20 - Diagnosis and maintanence  

--
My purpose is to encourage people to do things themselves!
Plus, this is a nice hobby for myself and at the same time I have the opportunity to save a lot of money by doing all the maintenance myself!
I’m not a professional with cars or motorcycles, I just want to learn how to do things myself.
If you do this service yourself, always check the correct instructions in the official service manuals. This is just my way of doing it!

Jani Voutilainen


You can follow me also in:
INSTAGRAM:   / voutilainenjani  
FACEBOOK:   / jani.voutilainen  
YOUTUBE:    / janivoutilainen  


Thanks for Music:
Cyberpunk Midtempo Electro Gaming Music | Future by Alex-Productions |    / @alexproductionsnocopyright  
Music promoted by https://www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
https://creativecommons.org/licenses/...