DIY Robot Liquor Dispenser | Amazing Homemade Alcohol Dispenser | Brilliant DIY Whiskey Dispenser

#AlcoholDispenser #DIYWhiskeyDispenser #LiquorDispenserDIY

Disclaimer: All parts and fittings that come into contact with liquor were cleaned, disinfected, and of stainless steel and lead free brass materials.

Hello and Thanks for watching. In this video I will show how to make an amazing Robot Liquor Dispenser. This cool and unique idea is not difficult to make and it looks amazing. Below is a list of all the parts. Please let me know if you have any questions or suggestions in the comments below. Like and subscribe if you enjoyed the video. Thanks for your support.

FOR SPONSORSHIPS AND BUSINESS INQUIRIES CONTACT:
[email protected]

DISCLAIMER:
All product links are affiliate links.
VIDEO IS STRICTLY FOR ENTERTAINMENT ONLY

TOOLS AND PARTS USED IN THE VIDEO:

Milwaukee Coordless Drill https://www.amazon.com/dp/B07KS4RCMR/...

Dewalt 4 1/2 Grinder https://www.amazon.com/dp/B00RVZ7DNO/...

Hobart Handler 140 Welding Machine https://www.amazon.com/dp/B009X43F38/...

Drill Bits https://www.amazon.com/dp/B00627C8ZU/...

FILMING EQUIPMENT:

Camera Cannon Rebel T7i https://www.amazon.com/dp/B06VT2NQD8/...

Camera Tripod https://www.amazon.com/dp/B07X2PGLLQ/...

Mac External Drive https://www.amazon.com/dp/B07GKK35BT/...

FITTINGS THAT MAKE UP THE BODY

FITTING QUANTITY

1) 3/4" NPT Chicago Coupler 1
2) 3/4" Carbon Steel Tee 3
3) 3/4" carbon Steel Street 45 ELL 1
4) 3/4" Standard 45 Elbow 3
5) 3/4" Brass Hex Head Plug 1
6) 3/4" Brass Square Head Plug 1
7) 3/4" Carbon Steel 90 Street Elbow 4
8) 3/4" Standard Carbon Steel 90 ELL 1
9) 3/4" Carbon Steel Cross 1
10) 3/4" Brass Close Nipples 9 ( can substitute with carbon steel)
11) 1" x 3/4" Carbon Steel Bushings 2 ( can substitute with stainless)
12) 2" x 1" Brass Bell Reducer 2 ( can substitute with 2" x 3/4" and eliminate 1" x 3/4" bushings)
13) 2" x 1 1/2" Carbon Steel Bushings 2

FITTINGS IN CONTACT WITH LIQUOR

FITTING QUANTITY

1) 1" x 3/4" Stainless Steel Bell Reducer 1
2) 3/4" Stainless Steel Tee 1
3) 3/4" x 1/4" Stainless Steel Bushing 1
4) 3/4" Stainless Steel Close Nipple 2 ( one end capped on one nipple, 10 Gauge Sheet Metal used to make cap.)
5) 1/4" Stainless Steel Compression x 1/4 MPT Elbow 1
(can substitute with a TEE and connect vent to it if unable to weld)
6) 1/4" Stainless Steel Compression 1
x 1/4" MPT adapter
7) 1/4" Lead Free Brass Nipple 1 (can substitute with stainless steel nipple)
8) 1/4" Lead Free Ball Valve 1 (can substitute with stainless valve)
9) 1/4" Lead Free Barb x 1/4" MPT Adapter 1 (can substitute with stainless steel adapter)
10) 1/4 Stainless Steel Tube Approximately 26" needed
11) 3/4" x 1/4" Lead Free Brass Bussing 1( can substitute with stainless bushing)
12) 1/4" lead free Socket Hex Head Plug. 1(braced/welded to 3/4" x 1/4" Bushing to prevent flow into the arm)
13) 1" x 3/16" Rubber O-Ring Gasket 2

BASE

1) 6 1/2" x 11 1/4" 10 Gauge Stainless Steel Sheet Metal
2) 6 1/2" x 11 1/4" x 3/4" Wood Base
3) 3/4" Flat Washer or any washer with diameter of approximately 1 5/8" diameter, Need 2 (welded to 2" x 1 1/2" Bushing)
4) 1/4" Flat Washer, Need 2 (welded to 3/4" washer)
5) 1/4" x 1" Hex Head Bolts with nuts and flat washers, Need 2 (welded to 1/4" and 3/4" washers)
1/4" Hex Socket Button Head bolts and washers 6