Removing 2021 Sienna's "Non-Removable" Seats (UPDATE IN DESCRIPTION)

UPDATE: need this to resolve the airbag error:    • Resolve Airbag Error After Removing S...  

Please help fund the ottoman project: https://gf.me/u/zd9r5b

This video shows you how to remove and reinstall the 4th-gen (2021-) Toyota Sienna's 2nd-row seats (captain's chair, Limited/Platinum).

Removal instructions PDF: https://1drv.ms/b/s!AmKYRCVlOpOGlZtPb...
Installation instructions PDF: https://1drv.ms/b/s!AmKYRCVlOpOGlZtS6...

𝗙𝗔𝗤:
Q: Can you show us how to remove the rails?
A: I won't be removing the rails myself but here's the instructions: https://1drv.ms/u/s!AmKYRCVlOpOGlaBDR...

Q: How much length do you have once the seats are removed?
A: 96 inches or 244cm from center console to trunk door

Q: Why would you want to do this?
A: I usually use the Sienna as a comfortable passenger car, but occasionally I need to haul something big.

𝗔𝗱𝗱𝗲𝗻𝗱𝘂𝗺 & 𝗘𝗿𝗿𝗮𝘁𝗮:
(1) With the seat airbags disconnected, the car will warn you with an airbag message. It returns a few seconds after you try to dismiss it. To resolve this error:    • Resolve Airbag Error After Removing S...  

(2) The white 13-pin connector is for seat belt warning and seat heater. Only the yellow 2-pin connector is for airbag. However it's still true that both need to be physically disconnected for the seat to come out.

𝗧𝗼𝗼𝗹𝘀:
Socket set (17mm, 10mm, & extension): https://amzn.to/38GLO8m
Pry tool: https://amzn.to/2KTnWpY
Torque wrench: https://amzn.to/3mPPo5d
(Using these Amazon affiliate links makes me a small commission at no cost to you.)
If you don't have/want a torque wrench, then tighten seat bolts as much as you can using a socket wrench. I recommend a torque wrench to get accurate bolt tension.
If you remove and reinstall seats often, then use an impact wrench to speed up the process.