How to Replace the Serpentine Belt on a Toyota Corolla | 2009 - 2013 1.8L 2ZR-FE

The serpentine belt, also known as the accessory drive belt, is a vital component in all vehicles. It is responsible for driving several essential systems, making it a crucial part of your car's operation. A serpentine belt typically lasts between 50,000 and 100,000 miles, but this can vary depending on factors like driving conditions, maintenance, and the quality of the belt itself.

Replacing a serpentine belt when it shows signs of wear or damage is essential. A worn belt can lead to engine failure, loss of power, and accessory malfunctions.

The video shows how to remove and reinstall the serpentine belt (accessory drive belt) on the following Toyota Corolla vehicles equipped with a 1.8L 2ZR-FE engine. In the video, I raise the car using ramps in order to access the underside and line up the belt with the crankshaft and AC compressor pulleys. However, if you are able to reach all the pulleys, you should be able to route the new belt on all pulleys from the top.

2009 Toyota Corolla
2010 Toyota Corolla
2011 Toyota Corolla
2012 Toyota Corolla
2013 Toyota Corolla

Tools required:
14 mm Socket
12 mm Socket
3/8 Ratchet

Serpentine Belt
Continental 4060480
or
Goodyear 1060480 - Goodyear Belts 1060480 Serpentine Belt, 6-Rib, 48" Length
https://amzn.to/3XsLu6v

#diy #diymechanics #Corolla #toyota

Disclaimer:
The information provided in this video and description is for informational purposes only. Please use your judgment and proceed at your own risk. The author or publisher of the video assumes no liability for any damage or injury caused by following the information provided. Please remember that when working on any DIY project, you bear all the risks alone. Seek professional assistance if you are uncertain about your ability to perform the work.