Update Firmware & Drivers for TWOTREES TTS 55 PRO, 10 PRO, and 20 PRO | Step-by-Step Guide

This guide provides step-by-step instructions for updating the firmware and drivers for TWOTREES TTS 55 PRO, 10 PRO, and 20 PRO models.


https://wiki.twotrees3d.com/en/LaserEngrav...

   • Update Firmware & Drivers for TWOTREE...  


Steps for Firmware Update

1. Download the Firmware

Visit the official TWOTREES website or the support page for your model.

Download the latest firmware file compatible with your device.

2. Prepare the Device

Connect your TWOTREES machine to a computer using the provided USB cable.

Ensure the machine is powered on and in update mode (refer to the manual for entering update mode).


3. Run the Update

Open the firmware update tool provided by TWOTREES.

Select the downloaded firmware file and follow the on-screen instructions to complete the update process.


4. Verify the Update

Restart the machine after the update.

Check the firmware version in the settings menu to confirm successful installation.


Steps for Driver Update

1. Download the Driver

Access the TWOTREES support page for your model.

Download the latest driver suitable for your operating system (Windows, macOS, etc.).



2. Install the Driver

Locate the downloaded driver file on your computer.

Run the installation file and follow the prompts to install the driver.


3. Confirm Installation

After installation, check if the device is recognized correctly by the computer.

If not, restart your computer and recheck the connection.

By following these steps, you can ensure your TWOTREES TTS 55 PRO, 10 PRO, and 20 PRO machines are up-to-date and functioning optimally. For further assistance, contact TWOTREES support.

#TWOTREES #FirmwareUpdate #DriverUpdate #TTS55PRO #TTS10PRO #TTS20PRO #TechTutorial #DIYTech #3DPrinting #trending #viralvideo #shortvideo