How to DIY service an Panasonic inverter air con.

Brand : Panasonic inverter
model : CS-PS18UKZ
DIY clean your home Panasonic air conditioner.
1) remove screw cover and screw
2)remove front cover
3)remove drain pipe from drain pan.
original is at right hand side,in this video the drain pioe connect at left hand side.
4)remove drain pan ,from left gand side after that right hand side,remove stepping motor.
5)check blower alignment
6) remove evaporator coil screw
7)pull up the evaporator coil (on top got a clip,pull the clip and pull up evaporator coil)
8) remove bearing housing
9) remove blower wheel screw
10)pull out blower wheel from right to left hand side
11)clean the evaporator coil using vacuum cleaner and coconut to brush the evaporator coil.
12)clean the fcu base
13)wash the front cover,air filter,blower wheel and drain pan and keep it dry after wash.
14)vacuum the drain pipe
15)fix back blower wheel
16)check the blower alignment
17) tighten the blower wheel screw
18)fix back bearing housing
19)clip and fix the evaporator coil
20) tighten the evaporator coil screw
21)fix the stepping motor
22)fix back the drain pan
23)fix back front cover

#Panasonic #aircon #VRV