How to Replace Bumper Bracket 2007-2013 Chevrolet Silverado

Buy Now!
New Bumper Bracket from 1AAuto.com http://1aau.to/ib/1ABBR00397

This video shows you how to install a bumper bracket on your 2007-2013 Chevrolet Silverado.

This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• 10mm Socket http://1aau.to/oaJ4/1AXAA00017
• 15mm Socket http://1aau.to/oa2h/1AXAA00015
• 21mm Socket http://1aau.to/oZG/1AXAA00043
• Trim Tool Set http://1aau.to/oTR/1AXXX00006
• Needle nose pliers http://1aau.to/oxr/1AXAA00051
• Needle nose pliers http://1aau.to/oxr/1AXAA00052
• 1/2 Inch Ratchet http://1aau.to/oZG/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/oaJ4/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oa2h/1AXAA00015
• Torque Wrench http://1aau.to/oaj2/1AXAA00044
• Gloves http://1aau.to/oxp/1AXSS00048
• Safety Glasses http://1aau.to/orU/1AXAA00343

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.