Скачать или смотреть Vordt Skip Easy Consistent Set Up (Check Description) - Dark Souls 3

ONLY WORKS ON REGULAR PS4

For a 60 FPS one (PS5), check out:
   • Vordt skip setup for 60 FPS (PS5)  

----------------------------------------

How to do it:

[0:00] First of all, you need to be above 100% weight ratio.
[0:08] Stand exactly on this corner.
[0:12] Without a Hawk Ring, aim with the bow and zoom completely
[0:13] Align the diagonal top right line in the scope so that it touches the corner of the wooden log, just like in the clip.
[0:20] Three backsteps, stop; one backstep, stop; four backsteps, stop. (Make sure you stop until your character goes into resting position again, let those animations fully finish for maximum consistency)
[0:42] When your character is in resting position, aim and zoom completely towards those barrels and align the camera using the vertical top line (That part of the wall is not perfectly straight, align that line as it was filling the gap) And then backstep once.
[0:55] Aim and zoom completely, align the camera using the same diagonal top line, fit the line inside the center of that hole in the wall. Then backstep once.
[1:02] Remove the weight so you're below 70% weight ratio again, wait a bit to make sure the game registers it, and then backstep.
[1:05] And you've done it! Sometimes the deathcam will randomly be angled differently, don't worry about it while you're still doing the last backstep, it will work the same way.

Thanks for watching!