Скачать или смотреть Flipper-Zero running Dual Evil Portal using the AWOK Dynamics Dual ESP32 Mini

Running that “Dulce Dual Evil Portal”. Below are the setup instructions to get everything up and running.

Setting up your computer up to run "FZEasyMarauderFlash" (Windows Users)
1. Download and install "Git for Windows" from https://gitforwindows.org/
2. Download and install the latest "VCP Driver" from https://www.silabs.com/developers/usb...

Setting up your Flipper-Zero SD Card to run Evil Portal
1. Update your Flipper-Zero to the latest version or the "Momentum" firmware
2. Download all the HTML "Portals" at https://github.com/bigbrodude6119/fli...
3. Place all the HTML files on your Flippers SD card at /apps_data/marauder/html/
Configure the ap.config.txt file with the SSID you would like to broadcast and place that file in the Flipper SD card at /apps_data/marauder/

Setting up the "AWOK Dynamics Dual ESP32 Mini" board to run Evil Portal (Windows Users)
1. Download the "FZEasyMarauderFlash.zip" file by SkeltonMan03, from GitHUB at https://github.com/SkeletonMan03/FZEa... by clicking on the green "Code" button at the top, then "Download ZIP"
2. Unzip "FZEasyMarauderFlash.zip"
3. Take note of where the "EasyInstall.py" file is located inside the folder you just unzipped
4. Open a "Command Prompt" and "CD" to the folder with the "EasyInstall.py" file then type easyinstall.py
5. If the Marauder files have not been downloaded to this folder yet, downloads occur automatically
6. Plug the white port into your computer and type in the option/number for "Flash Marauder on AWOK Dual ESP32 Mini (White Port)"
7. Wait for the completion message on your computer then unplug the board from your computer
8. Plug the orange port into your computer
9. If you still have command prompt open, type easyinstall.py again and the program starts back up
10. Plug the orange port into your computer
11. Type in the option/number for "Flash Marauder on AWOK Dual ESP32 (Orange Port)"
12. Wait for the completion message on your computer then unplug the board from your computer
13. Place all the HTML files and the "ap.config.txt" file on the root of another SD card. This card will be used for the SD Card slot on the "AWOK Dynamics Dual ESP32 Mini" board
14. Plug the new SD card into the AWOK board
15. Now you can run two evil portals at once

Running Evil Portal
1. Attached a GPIO board with the "Marauder" firmware flashed to the ESP32 chip
2. Run the "Marauder" app from your flipper
3. In the "Marauder" app, scroll down to "Save to flipper sdcard"
4. Press the Center/OK button
5. Press the right/Yes button twice. This will safe all the data you collect to the SD card on the Flipper-Zero
6. Scroll to "Load Evil Portal HTML file" and press the Center/OK button
7. Scroll to the desired HTML file and press the Center/OK button. You will get a message on the Flipper stating that the HTML portal has been set
8. Sometimes the "ap.config.text" file will not run correctly from the Flippers SD Card. In that case, scroll to "SSID" and choose one of the options. If you want to add a specific SSID, choose "add name". Be aware that when you add a specific name this way, you cannot have any spaces in between the SSID name.
9. Scroll to "Evil Portal", make sure that "start" is highlighted and press the Center/OK button
10. Your SSID is now being broadcast
11. You can retrieve any data you collect on your SD card at apps_data/marauder/logs/. It should be titled "evilportal_xx" where "xx" is a number