Скачать или смотреть The Ultimate Machinist Toolbox: Essential Tools for Day 1 on the Job

Buying tools when you are first starting out as a Machinist can be a bit confusing. I'll cover the most important tools you'll need on day one of your new job. Keep in mind, every shop is different and may require you buy different tools, so asking your new employer is a great idea but here is my list of what you should be buying...at a minimum.

6" Calipers - Electronic or Dial
0-1 Micrometer - consider a Micrometer set that includes 0-1, 1-2, and 2-3
Test Indicator - consider accessories for holding such as a mag base
Tape Measure
6" Scale/Ruler - a nice inexpensive pocket tool you'll use everyday
Edge Finder
Files/Stone
Ball Peen Hammer
Dead Blow Hammer - or equivalent soft tool
Wrench Set - both inch and metric up to 1"/25mm
Allen Keys - both inch and metric up to 3/8"/10mm
Screw Driver Set - consider a multi tool
Tap Handles - at least to be able to handle 1/4"/6mm taps and smaller
Calculator - scientific recommended
Pens/Pencils/Markers
Notepads
Flashlight
Safety glasses
A box to put all this in!
Few extra thoughts on tools...

Your tool collection will grow over the years, don't worry about buying every possible tool at once. The tools you want/need will evolve as your career progresses. And please keep this in mind...

NO SHOP WILL REQUIRE YOU TO BUY CUTTING TOOLS OR OTHER CONSUMABLE ITEMS.

To follow up with this video, I will be putting out a guide on buying the big ticket items, the micrometers/calipers/indicators. These can account for 75% of what you spend on your tools when first starting so making the right decision is very important.

#LearnCNC #Tools