노후 시골주택 외부처마와 마당데크 부분 공사

오래된 시골주택 외부처마 삼나무루버 시공과 마당데크 오일 스테인 작업.
2024.10.21일부터 시작하여 2024.10.25까지 4일간의 일정
중간에 비가 많이와 하루 쉬고 작업.
이 주택은 1년간 별난목수 팀에서 주택시설관리보수를 위탁받아 관리 하기로 계약했답니다.~

시청해주셔서 감사합니다.
Thank you for Watching
チャンネル登録とGoodボタンをお願いします！ 新しい動画は随時アップロード予定です。

#방부목 #방부목데크 #방부목페인트칠 #방부목오일스테인 #deck #preserved_wood #oil_stain #목공 #목수 #carpentry #carpenter #carpenter_skill #woodworking #woodwork #목수 #별난목수 #별난목수후니

원목 식탁 넓이 줄이기 식탁리폼 Reforming furniture Table Reforming(저작권때문에 재업로드 합니다)
   • 원목 식탁 넓이 줄이기 식탁리폼 Reforming furniture...  

별난목수의 목공 작업실 my carpentry studio
   • 별난목수의 목공 작업실 my carpentry studio  

데크재의 줄무늬(콤보)는 디자인 모양 이 아닙니다.
줄무늬(콤보)가 뒷면입니다.
마당데크의 오일스테인을 칠할땐 반드시 색이 있는 가급적 진한색을 발라주는것을 권장해요.

데크재의 바른사용
데크 보드를 만든 제작자의 의도가 가장 중요한것이고,
골진 부분이 땅쪽을 보게 설치하는 것이 데크보드 설계자의 의도라고 명쾌하게 써있습니다.

왜 저희집 데크는 골진부분이 하늘로 가게 설치해서 청소도 힘들고 햇빛이 잘안드는 북쪽 데크는 곰팡이 끼고.. 스테인칠할때도 힘들고

늘 언제 몇일 잡아서 뒤집는다 하면서 못하고 있는데..

아래 영문으로 된글은 한글처럼 보이쥬?
(추가: 한글처럼 안읽히는 분들을 위하여..)
골진 부분이 위로 가면, 습기와 물이 골질 부분에 고여서 곰팡이가 낀다.
고로 빨리 썩는다.
아래로 가게해서 공기가 골에 순환되도록 만든 것이다.
이 세가지가 핵심입니다.

원문
There are debates that just won’t end. Chicken versus egg, for example. Or the now-trending Superman versus Batman question. And how about nature versus nurture? Or creation versus evolution? In deck construction there is one question that is sure to ignite passionate argument: Should decking ridges face up or down?

INTO THE GROOVE
Decking timber usually have ridges that run along the length of the board. Also called “grooves” or “reeds”, these ridges on the board may face up to provide functionality and aesthetics. Or they may be installed facing down, the orientation recommended by manufacturers as the correct way to install them.

UP AND AWAY
The reeded side of the timber boards make for interesting patterns that look sleek and pleasing, thus begging the builders to install them face up. Like racing stripes that run across the side of a sports car, the timber ridges impart a sleek and sexy look that evokes energy and balance.

But wait… there’s more! People also lay the decking timber ridge side up because they think that the ridges help increase traction and make the deck less slippery. And there are those who appreciate the feel of the textured surface on their bare feet, and harp on the therapeutic effects this provides, as well.

DOWN AND DIRTY
However, every decking timber manufacturer will tell you: the proper way to install a board is ridge side down. The ridges, they say, were designed to let air circulate underneath the boards. This, according to them, prevents the buildup of moisture and, consequently, of mould. The ridges are not there to keep you from slipping and sliding around your deck. Nor are they intended to make your deck look nice. They are there as a structural feature to improve its longevity.

Besides, they point out, with the ridges facing up, the boards tend to collect moisture between the grooves; a situation that can spiral dangerously downward when mould start to multiply or when the timber starts to rot.

THE VERDICT
By all means… install the decking timber with the grooves facing down. It’s the proper thing to do. Your deck will probably last longer and spare you from the expense and effort of cleanups and repairs.

But if you prefer it because it looks better, and if you think it will keep you from accidental slips and if you enjoy walking around barefoot and you are prepared to mitigate against rot and mould — install with the ridges facing up.