Artillery Sidewinder X4 plus - HUGE,fast and affordable klipper printer?

Spent a lot of time testing and optimizing this printer. See if this large budget printer is a good one - or if you can skip it. Find lot's of tips that will definitly ENHANCE your experience with this printer!
From the contents (use my chaptermarks!): Specs, Nozzle change, Bed levelling, do ANYTHING inside Linux? TIP remote monitoring and shutdown, Slicer SETTINGS, Print Examples, low temp - adhesion problems! TIP use the 0.8 nozzle, Bonus: UNBOXING

🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐
11.4.24: they've reduced the price to 355€ (without 5KG PLA) → https://shrsl.com/4hjmm
or 399€ with 🔥5KG PLA Filament 🔥 🛒 https://shrsl.com/4hfgq (Affiliate)
(with VAT if you apply Code: FFSWX4PL2), free shipping from Germany

I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON: https://bit.ly/2ESMtIO

✅better Nozzle: https://cuts.top/DFTa (also find the 0.8mm there)
✅Yi Home camera IP Cam works https://cuts.top/DFSO
✅ my Orca-profile (Printer, Filament and process - using their ArtillerySlicer settings)
find them here: (incl. better print start procedure)
→ https://drive.google.com/drive/folder...

🔖▬▬▬Additional Infos:▬▬▬▬▬▬▬▬▬🔖
Large printer, claimed to be fast (klipper, linear rails,...)
relativly cheap option, quite easy to setup and operate

Hardware changed in details:
gantry mount easier, still very stable (with additional Z Rods)
Filament Spoolholder changed
linear rails on X and Y, Z like on the old one
printhead heatsink bigger, nozzle silicone better fit
bigger, better Nozzle: https://cuts.top/DFTa (also find the 0.8mm there)
Bed heats fast now! 3-4 mins from 23C to 60C
FULL USB A port + USB c port! no more reset button
external Wifi antenna with SMA Plug!
tray grip still miserable (but small detail)
printbed doesnt snap in place as easy as on the old one (tip washers!)

Software - takes longer now to boot up (klipper on mkspi instead of marlin)
Fluidd webgui - fully functional, no restrictions
setup steps seem easy, onscreen instructions a bit confusing
Zoffset first then manual levelling, then 11x11 auto bedmesh
SSH: user: mks pwd: makerbase 💡
Logitech USB Cam: couldnt get it running in their linux...
but my Yi Home camera IP Cam works https://cuts.top/DFSO

Hardware seems to be good, but klipper config is sub optimal...
Auroratech: lower the stepperZ homing speed for better accuracy
[stepper_z]
homing_speed:5 ##(instead of 20!) 💡

🎥▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬🎥
my Hangar: http://goo.gl/QNzck
Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro

🙏▬▬SUBSCRIBE!!! → http://goo.gl/szFJv ▬▬ 🙏
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
►   / rcschim  
► https://rcschim.BLOGspot.com
► [email protected]
►   / rcschim  
►   / rcschim  
► Discord Server:   / discord  

🔖▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬🔖
00:00 Intro
01:05 Specs, overview
01:52 Nozzle change
02:37 Hardware
04:02 Bed levelling
05:23 Software needs improvement
06:50 do ANYTHING inside Linux?
07:28 TIP remote monitoring and shutdown
07:44 Slicer SETTINGS
08:16 Example - fast print
09:29 Low temp - adhesion problems!
11:02 TIP use the 0.8 nozzle
11:18 no Stringing no adhesion...
12:18 more testprints
13:00 Should you buy it?
14:30 Bonus: UNBOXING
15:08 Hardware changes X3 plus vs. X4 plus
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
#artillery #d3dprinter #rcschim