How to replace a Mitsubishi Mirage CVT part1

Update: Here is part 2:   • Mitsubishi Mirage Transmission replac...  
This is Part 1 of 2. This should apply to most 2012 and newer Mirages, Attrage, Space star, G4. There are going to be some minor differences in some markets(Non-North American) that may have auto start/stop and/or don’t have a maf sensor(only map).
Please consider subscribing.
Tools used in this video are:
-10mm socket and wrench(dipstick tube,misc brackets)
-12mm Socket and wrench(starter bolts and nut,bell housing bolts)
-14mm(trans mount and cv heat shield)
-17mm (tie rod end nut)
-19mm wrench(balljoint nut)
-21mm Socket(wheel nuts)
-32mm axle socket
-1/2" impact https://amzn.to/44LgYqo
-BFH
-1/4" Craftsman impact driver https://amzn.to/48cYlye
-Gearwrench serpentine belt removal tool-17mm(torque convertor bolts)https://amzn.to/464Am2G
-Body clip removal tool or side cutters-(inner fender)https://amzn.to/3r8impg
-pos flat screwdriver or small narrow chisel(open up axle nut flange)
And probably a few more things that I forgot.