Falcon Controller Build Part 2

This is Part 2 on a how to video to build a Falcon Pixel Controller with all of the hardware from Wired Watts on their build a controller kit. I decided to build it myself rather then have the controller already built because I wanted the expansion for a total of 32 ports. I recommend building one of your own to gain a little better understanding on how they work and how they are put together. You might be able to get the controller from Wired Watts as well. My first controller I made I did with the help of one of Counter Holiday Lights Videos, he also has a lot of information on his page that I have found helpful. I'm hoping to help someone just getting started in this hobby to make it a little less overwhelming. You can add another expansion board if you would like but this is how I like to do it. I use 12v and Ray Wu connections, if you prefer xconnect connectors the process would be the same just with the other style connector.

PixelController.com
WiredWatts.com
   / @counterholidaylights  

Supplies:

WiredWatts.com
NBF-32026 Bud Box
NBF-32026 Mounting Plate Kit for Falcon Controllers
Meanwell 12v 350w power supply x4
Network Pass-through Gland with Dongle x2
AC Power Cord 18 AWG x2
PG7 Gland 8 Pack x4
PG9 Gland 5 Pack
18 in. Pigtails x16
30 in. Pigtails x16
Red Wire x3
Black Wire x3
Pigtail Heat Shrink Tubes 1-32

PixelController.com
F16V4 Pixel Controller
F16V4 Expansion Board With Ribbon Cable