Скачать или смотреть Last-Minute Babyproofing Ideas For Hosts

Here is what you'll need!

Pool Noodle Table Padding Hack

SUPPLIES
Pool noodles
Scissors or box cutter
Double-sided tape
Marker (optional for measuring)

INSTRUCTIONS
1.Measure and cut four pieces (two widths and two lengths) and exclude the corners measurements.
2. Cut four smaller equal-sized pieces for the corners.
3. Use scissors or a box cutter to cut into the pool noodle pieces all the way through lengthwise, creating a space for the pool noodles to wrap around the table edges.
4. Put double-sided tape on the table where the pool noodle pieces are going to be attached. Tape horizontally for the length and width. 5. Tape vertically for the corners. (*Tape and put one noodle piece at a time to ensure tape strength.)


Pool Noodle Finger Protection Door Hack

SUPPLIES
Pool noodle
Scissors or box cutter
Double-sided tape

INSTRUCTIONS
1. Cut about a 1-foot piece of pool noodle.
2. Use scissors or a box cutter to cut into the pool noodle piece all the way through lengthwise, creating a space for the pool noodles to wrap around part of the door edge.
3. Put double-sided tape, vertically, on the upper door (where it closes).
4. Place the shorter noodle piece vertically on the corners where the tape is.


Blinds Cord Clothespin Hack

SUPPLIES
Clothespin

INSTRUCTIONS
1. Take a clothespin and wrap the cord around one of the bottom open ends.
2. Wrap until the cord is out of reach, then use the top closed part of the clothespin to clamp around a higher end of the cord to secure.
3. Closed Cabinet Hack

SUPPLIES
Hair tie

INSTRUCTIONS
1. Simply take a hair tie and wrap around both cabinet handles.
2. Tug on handles to test for security.



Toilet Paper Baby Hack

SUPPLIES
Rubber band

INSTRUCTIONS
1. Simply put a rubber band around the toilet paper roll in your bathroom.
2. Take off the rubber band when needed and place it back on when not.



Exposed Outlet Hack

SUPPLIES
Bandages

INSTRUCTIONS
1. Put bandages over exposed outlets, horizontally, placing the mid-sections of the bandages over the sockets.



Shoe Box Power Strip Hack

SUPPLIES
Shoe box
Box cutter or scissors
Gaffer tape or duct tape

INSTRUCTIONS
1. Get a shoe box and remove the lid. Cut a 2x2-inchopening on each side of the width ends of the box (two openings total).
2. Place your power strip into the box and place the strip’s cord into one of the cut openings. Then plug the strip’s cord into an outlet.
3. Place cords from appliances that are going to plug into the strip through the opposite cut opening. Then plug those cords into the strip.
4. Cover the shoe box with the lid. And place gaffer tape or duct tape on two or more sides to secure lid from being opened.


Check us out on Facebook! - facebook.com/buzzfeednifty

Credits: https://www.buzzfeed.com/bfmp/videos/...


MUSIC
SFX Provided By AudioBlocks
(https://www.audioblocks.com)
Spyfall
Licensed via Warner Chappell Production Music Inc.

STILLS
Not Allowed Sign
alessandro0770/Getty Images
Plastic Container
design56/Getty Images
American socket
studio 023/Getty Images
Lightning symbol set
pialhovik/Getty Images

VIDEO
Baby Crawls Rack Focus Low Angle Slow Motion
Revelpix/Getty Images
Going Looking for Mother
proBAKSTER/Getty Images