How to Replace Exhaust Manifold 2009-2013 Honda Fit

Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from 1AAuto.com https://trq.video/ia-1AEEM00905

This video shows you how to install an exhaust manifold on your 2009-2014 Honda Fit. The exhaust manifold collects the combustion gasses from your vehicle's engine, and directs them to the rest of the exhaust system. Frequent heating and cooling can lead to cracks or leaks. Installing a new exhaust manifold is often the only solution.

This repair was done on a 2010 Honda Fit Sport 1.5L Hatchback 4-Door FWD Manual and the process should be similar on the following vehicles:
2009 Honda Fit
2010 Honda Fit
2011 Honda Fit
2012 Honda Fit
2013 Honda Fit
2014 Honda Fit

Tools you will need:
• 10mm Socket https://trq.video/oe5-1AXAA00017
• 12mm Socket https://trq.video/ofN-1AXAA00015
• 14mm Socket https://trq.video/ofN-1AXAA00015
• O2 Sensor Socket
• 1/2 Inch Impact Gun https://trq.video/oW-1AXAA00252
• 3/8 Inch Impact Gun
• 3/8 Inch Breaker Bar
• Ratchet https://trq.video/ogu-1AXAA00016
• Sandpaper
• Razor Blade / Gasket Scraper
• Sanding Block

Subscribe:    / @trq  

Check out our playlist:
Honda Fit 2009-2014 2nd Generation:    • Honda Fit 2009-2014 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.