Скачать или смотреть how to install RECI laser tube

This video will show you how to install the RECI laser tube with laser machine. First, please fix the laser tube holder with a screwdriver, please do not over-tighten the screw, just keep the laser tube free to move. Then, connect the water pipe, the shorter one is connected to the water outlet, and the longer one is near the high pressure end, which is the water inlet. Third, please connect the low voltage side (black cable) and the high voltage side (red cable). Remember that the high voltage end must be tightened, otherwise the high voltage breakdown will damage the laser tube. The distance between the first mirror and the laser tube is recommended to be kept from 3cm to 5cm, if the distance is too close, maybe effect the working effect. Hope it helps.
More assistance, please feel free to contact us at [email protected].