Скачать или смотреть How The Finger Joint Machine Factory Make Wood Finger Joints into Wood Panels Boards In Long Meters？

Contact us via +86 18503828183 Email: [email protected]
More info pls visit https://www.fingerjointermachine.com To manufacture wood panels or boards with finger joints in long meters, finger joint machine factories typically follow a series of steps. Here's a general overview of the process:

1. Raw Material Preparation: The factory begins by sourcing high-quality wood materials, such as lumber or timber, which are suitable for finger jointing. The wood should have consistent dimensions and be free from defects.

2. Wood Cutting: The raw wood materials are cut into individual pieces of specific lengths and widths, depending on the desired dimensions of the final wood panels. This step ensures that the wood pieces are uniform and ready for the subsequent finger jointing process.

3. Finger Jointing: The finger jointing process involves creating interlocking profiles, commonly referred to as "fingers," along the length of the wood pieces. The finger joint machine, equipped with specialized cutter heads, is used to cut precise profiles on the edges of the wood pieces. These profiles typically have alternating male and female parts that fit together tightly.

4. Gluing: After the finger joint profiles are cut, an adhesive, typically a type of wood glue, is applied to the mating surfaces of the fingers. The glue helps bond the joint securely and enhances the strength and stability of the final wood panel.

5. Assembly and Clamping: The wood pieces with finger joints are assembled, aligning the male and female parts of the fingers. The jointed pieces are then tightly pressed together using clamps or hydraulic presses to ensure a strong bond between the fingers and allow the glue to cure properly. The clamping process may involve applying pressure evenly along the length of the jointed pieces.

6. Curing and Finishing: Once the glue has cured, the clamps are removed, and the jointed wood pieces are left to go through a curing process. This ensures that the adhesive fully sets and creates a durable bond. After curing, the wood panels may undergo additional finishing processes, such as sanding, planing, or surface treatment, to achieve the desired smoothness and appearance.

7. Quality Control and Packaging: The manufactured wood panels go through a quality control inspection to check for any defects, such as gaps in the finger joints or imperfections in the surface. Once approved, the panels are typically cut to the desired length and stacked or packaged for shipment to customers or further processing.

It's important to note that the specific details of the process may vary depending on the equipment and techniques used by different finger joint machine factories.