I Built a 22mm Bait Pump That Actually Works!

Build your own 22mm bait pump that works. while the weather and the fishing is poor at the moment i thought i would show you how i make and build my 22mm lugworm bait pumps from scratch only using quality stainless for the pump shaft the body can be made of copper or stainless. for me copper is the goto material .The shaft is the hardest bit of the pump to make and ebay makes sourcing these parts easier


Bait pump build Parts
22mm copper pipe
22mm equal tee
8mm 304 stainless rod
5/16 fuel pipe tubing to fit 8mm rod
6mm nylon top cap with 8.5mm hole for shaft
cut from nylon chopping board seems hard wearing
18mm stainless washers x2
19 silicone seal these can be bought on ebay
make your self homemade seals    • How to make 22mm homemade bait pump s...  
and a m10 stainless nut
HAPPY BUILDING