Visual Studio/C# and DAQ

The purpose with this tutorial is to read and write data using a DAQ device where we use Visual Studio and C#. We will exemplify by using a DAQ device from NI (previously National Instruments). We will use a DAQ device called USB-6008 (which is part of the USB-600x low-cost series).
DAQ devices from NI use the NI-DAQmx driver. Examples shown will work on all DAQ devices from NI that are using the DAQmx driver (which is many!). The principles used can can also be applied on other DAQ hardware from other vendors.

Tutorial:
https://www.halvorsen.blog/documents/...

Blog:
https://www.halvorsen.blog/

YouTube Channel @Industrial IT and Automation ​
   / industrialitandautomation  

Chapters:
00:00 Introduction
01:46 Data Acquisition (DAQ)
04:58 NI DAQ Devices and DAQmx
09:45 Visual Studio/C# Examples
10:02 Battery Indicator Examples (Analog In)
21:10 TMP36 Temperature Sensor Example (Analog In)
32:03 Analog Out Example
37:57 LED Example (Digital Out)
46:31 Push Button Example (Digital In)