Water Well 380 feet : Sediment Pull Successful 391' feet Tiger Air Lift pump

Are you in need of pulling sediment from 350+ feet? So far, my "Tiger Pump" Air lift Pump Design, is able to shoot the sediment up out of 390' feet and kept pulling more sediment out to point taken 1' foot out in roughly 15 mins. This is DUAL Air Compressor, 1/2" inch Poly, and 3/4" Main drain Poly, both 400' feet spools.

The Sediment so heavy, looks like mud in bottom of Gallon Jug. This is what your looking for, Hope its wonderful Tool to add to your Maintaining Life. Clean water, Good Health and Food!

If you would like a Tiger Pump made by me, Brandon Michael Treadwell, just leave a Comment and email your comfortable with to communicate with me. If you need advice on building one, try my best to my knowledge to help you over Comment board.

Note : The pump did pull water with 36' feet of water above the pump(314' feet Water line Top) while pump at 350' feet. So if you got shallow water in your deep deep well, this is idea Tiger Pump for depth need to work.

Equipment : Two 1.5 hp Air Compressors at open wide throttle. Adjust pressure down, after gets to minimum air in tank and machine just running full steam ahead. Fully open wide, leave it if all got to pull just enough water out. Should pressure jet out, not flow for amount of depth.

Thank you for watching, Please Subscribe!