Tube and pipe bending and endforming from coil 4-RUNNER H1 | BLM GROUP

Further information: https://www.blmgroup.com/tube-benders...

The 4-RUNNER H1 straightens, end-forms, cuts and bends, with flexion or variable radius method.

It can perform multi-radius right-hand and left-hand bending operations and can work diameters up to 12.7 mm (.5”) from coil.

The system is particularly suited for making flat and three-dimensional serpentines; these parts are typically used in the refrigeration, HVAC, automotive and household appliances industries.

The low-profile geometry of the bending head of the 4-RUNNER H1 allows right-hand and left hand in-process and multi-radius operations. It is ideal for making 3D serpentines with more than one bending radius and parts with particular complicated geometries.