Fix Bent Fins with Condenser Fin Straightener

Fix the bent and messed up fins on our HVAC unit. Making an improvement to airflow through our condenser. I estimate that we had only 85% of available area with 15% damage, after working on the condenser coil for about an hour I estimate it was improved to 95% airflow. You can get real serious when you repair the bent and damaged fins and take the time to really go after it. I was only looking to make a major improvement to airflow and I think I accomplished that.

The universal A/C Safe Fin Tool I used: https://amzn.to/3NHCJzD

The combo pack of fin tools to get you at the specific fins per inch: https://amzn.to/3NIMyx4
(affiliate links)
Good Luck

All Rights Reserved

http://zipzapdiy.com

Every repair situation is unique. ZipZapDIY cannot guarantee that your repair will be the same as depicted in this video. You should use this video as one information source of many, and you use this information at your own risk. Any tools, parts recommendations links used in this video must be verified by you to be applicable to your situation. ZipZapDIY cannot be held liable for any results from your improper use of tools or repairs. ZipZapDIY highly encourages you to seek out multiple sources of information regarding the repair depicted in this video. There is no warranty expressed or implied warranty or guarantee that you will experience similar results. You are solely responsible for the safe use of tools and equipment during your repair.