Скачать или смотреть Korbanth Luke V2 Lightsaber | Repair Commission

Another lightsaber repair commission! This time it’s a Korbanth Luke V2 that I got to fix, and for a customer I’ve previously done an install for! The lightsaber had some button issues, but I fixed it up along with some small updates.

To the customer who commissioned it: thank you for trusting me with your lightsaber, I hope you like it, and if you ever need anything don’t hesitate to ask!

— TIMESTAMPS —

00:00 - Intro
00:26 - Updated Firmware and Config
01:56 - How It Works
02:15 - Notes On The Clamp Card
03:39 - What I Fixed
09:51 - IMPORTANT: How to put in the chassis safely
12:01 - With The Blade
12:57 - Final Words

— THINGS TO REMEMBER —

Follow all instructions and tips from this video.
The wires for the buttons will always be at risk of wearing down over time, so make sure you put the chassis in like I demonstrate as to prolong the lifespan.
Clamp Card can be adjusted with different types or layers of tape to achieve preferred button presses.
Battery negative is towards the neopixel connector, battery positive is towards the speaker.
If you need access to the micro-usb port, you’ll have to push it from the bottom and break the glue a bit.
— CUSTOMIZATION RESOURCES —

Plecterlabs Website:
https://www.plecterlabs.com

CrystalFocus Customization Website:
https://crystalfocus.net

CFX Manuals:
https://www.plecterlabs.com/shop/arti...

Firmware Updates:
https://www.plecterlabs.com/shop/arti...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Music in this video is used with the permission of Closed On Sunday:
   / closedonsunday  

Have lightsaber or business inquiries? Hit me up on Instagram or Email me. In the meantime, check out my social medias!

Beacons:
https://beacons.ai/averycastillo

TikTok:
  / averycastillo  

Instagram:
  / official.averycastillo