How to Replace Rear Power Window Motor & Regulator Assemblies 2006-2010 BMW 550i

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com https://trq.video/ia-1AWRG03200

This video shows you how to install new rear window motor & regulator assemblies from TRQ on your 2006-2010 BMW 550i.

This repair was done on a 2008 BMW 550i Base 4.8L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles:
2006 BMW 550i
2007 BMW 550i
2008 BMW 550i
2009 BMW 550i
2010 BMW 550i

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obVa-1AXAA00013
• Phillips Head Screwdriver https://trq.video/obVa-1AXAA00013
• 10mm Socket https://trq.video/ob2V-1AXAA00017
• Trim Tool Set https://trq.video/oaJ9-1AXXX00006
• E12 Inverted Torx Socket
• T30 Socket
• Torque Wrench https://trq.video/obxV-1AXAA00044
• Gloves https://trq.video/obJF-1AXSS00048
• Painter's Tape
• Safety Glasses

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.