Скачать или смотреть Reusable cobwebs- READ DESCRIPTION

This is my favorite cannon of 2015. The sand plate and hybrid mechanism are completely original. At 5 likes (this has been easily obtainable in our last few videos), I will make a schematic for the sandplate. At 10 likes, I will make a schematic for the cannon.

Clearing up the concept of the video:
The mechanism starts by allowing only 50 sand to fall. In the video, I use a messy pulse extender but it works. The more complicated part is that the sand falls into the cobweb. The pistons DO NOT extend against the cobweb but the block above the cobweb where the sand is. There needs to be FOUR piston pulses to push the sand out of the cobweb (note: I am not sure if this varies with server lag). To get the 4 pulses, use a pulse limiter and then use repeaters to break up the signal 4 times. After the piston extends 4 times, there will be a visual glitch but this is when the tnt should go off to compress the sand.

How to connect with a 50 stacker:
You may need to make minor adjustments to the wiring of the sandplate so that it is not in the way of the barrel. As soon as the sand is pushed out of the cobweb and the boosters compress the sand into the barrel (no cobweb in the barrel), the propulsion tnt should blow up and push the sand out of the barrel. The hammer should also go off at this time. This is easy but the hybrid shot is hard. In between the 50 sand and the hammer, there should be a space in the barrel for 1 sand for the hybrid shot. To make this automatic like the 50 sand, you have to use the 4 pulse trick again (if you don't do this, the sand won't be compressed on the correct side of the barrel and won't hybrid; it is also glitchy to use a full block that changes into an entity I the barrel). As you saw in the video, I could not fit the hybrid on the same side as the sand plate, meaning the alignments were off. As a result, I had to add a piston on the other side of the barrel to realign all the tnt and sand on the right side of the barrel. Note: most Leins compress on the left side but I made a mistake so the sandplate is positioned where you have to compress on the right side of the barrel.


I hope to make an explanation video but I wanted to make this before someone else figures this out since cannons are being developed more quickly than ever.

Hope you all enjoy this OP cannon. You can split bases faster than ever :)

Sandplate Schematic: http://www.mediafire.com/download/i7w...
Cannon Schematic: http://www.mediafire.com/download/96l...

Server: play.minelink.net