How to change engine oil on 2008 Yamaha YZF R1

DISCLAIMER: This is just a demonstration video of how I change my oil and oil filter on my 2008 Yamaha YZF R1. If you mess up your motorcycle (ANY MAKE or MODEL) following this video, I am not responsible for any damages whatsoever. If you are not comfortable doing it yourself, then please take it to a certified mechanic. If you run your bike with excess oil you may damage the engine. If you over-tighten bolts you may break them, if you put less oil, you may seize your engine. If you use the wrong grade of oil, you may damage the engine and clutch.

This is my first time making a HOW TO video, so it's not all that great! My cousin did an awful job at the end when I was putting all the plastics together at the end so bare with it!

All the information provided below is from my service manual, may vary from bike to bike. Refer manual!

For 2008 YZF- R1:

Engine oil drain bolt needs to be tightened up to:
43 Nm (4.3 m·kg, 31 ft·lb)

Engine oil quantity:

Total amount
3.83 L (4.05 US qt) (3.37 Imp.qt)

Without oil filter cartridge replacement:
2.90 L (3.07 US qt) (2.55 Imp.qt)

With oil filter cartridge replacement:
3.10 L (3.28 US qt) (2.73 Imp.qt)