Building Xbox 360 Arcade Controls

This is the start of a series of videos on building your own arcade stick for the xbox 360.
We start with the xbox Controller hacking part.
Each button in the controller has a black contact which consists of a "Ground" and a "Signal". The button contact map is as follows;
A button = Top is Signal / Bottom is Ground
B Button = Top is Signal / Bottom is Ground
Y Button = Top is Ground / Bottomis Signal
X Button = Top is Ground / Bottom is Signal
Start = Top is Ground / Bottom is Signal
Globe = Top is Ground / Bottom is Signal
Back = Top is Ground / Bottom is Signal
Left Bumper = Left side is Ground / Right side is Signal
Right Bumper = Left side is Ground / Right side is Signal
Up = Top is Signal / Bottom is Ground
Right = Left is Signal / Right is Ground
Down = Top is Signal / Bottom is Ground
Left = Left is Ground / Right is Signal

When you pull apart the controller, you'll know what I mean. It's very hard to break the controller when you're working on it. If you short something, the controller turns its self off. Find the problem, and turn back on.
Correction - Wire is 0.12mm

Part 2 coming soon.