E Rickshaw Brake Shoe Replacing | How To Replace Electric Rickshaw Brake Shoe | Govt ITI HB Halli

In this video we have explained how to replace Electric rickshaw rear wheel brake shoes,
One of the most important safety features of a car is its ability to stop. Replacing the rear brake shoes on a car will ensure that the brakes are in good working order and ready to function properly in the event of an emergency. You can learn how to change rear brake shoes in a professional manner to save yourself money and to help you understand your car better. Even a novice can learn to change brake shoes, provided they have the right tools.

1. Jack the vehicle up and remove the wheel.
2. Remove the dust cap with a screwdriver.
3. Use a ratchet to unscrew the axle bearing nut.
4. Twist the drum as you pull it backward to remove it.
5. Spray the drum with rust remover if it’s stuck.
6. Use pliers to remove the primary brake shoe springs.
7. Pull out the brake shoe clips.
8. Remove the parking brake cable.
9. Pull the brake shoe set free from the backing plate.
10. Place the new brake set next to the old one.
11. Swap components onto the new set.
12. Reset the parking brake adjuster.
13. Hold the brake spring away from the end of the cable.
14. Place the shoe set against the backing plate and secure it.
15. Connect the return springs.
16. Install the new drum.

What tools are needed to prepare when replacing brake shoes?
The Tools Needed to Change Brakes
Start With the Right Protection.
Brake Pads and Rotors.
Jack and Jack Stand.
Lug Nut Wrench.
Brake Caliper Piston Tool.
Brake Bleeder Wrench.
Allen Wrench Set.


#erickshawbreakproblem
#erickshawbreakrepairing
#erickshawbreakfitting
#erickshawrepairing
#MEV
#GovtITIHBHalli
#EVBrakeShoe
#EVRickshaw
#MaheshSulakhe