DIY Dog Bowl Stand | Free Easy Project Plan

Pamper your pooch with a custom-built dog bowl stand! In this video, we'll show you step-by-step how to create a stylish and functional dog bowl stand using Milescraft tools. Whether you're a seasoned DIYer or just starting out, this project is perfect for you.

Materials Needed:

▸Plywood
▸Milescraft 4006 3" Bench Clamp
▸Milescraft 1409 TrackSawGuide
▸Milescraft 3404 PushStick
▸Milescraft 3406 GrabberPRO
▸Milescraft 1219 CircleGuideKit
▸Milescraft 1327 PocketJig400
▸Milescraft 5209 PocketScrewKit350

Steps:

▸Cut plywood to 10-1/8 by 21 inches.
▸Use the Milescraft Grabber Pro to cut 1-1/2 inch wide strips and glue them to the outer edge of the plywood.
▸Cut two 7-1/4 inch circles with the Milescraft Circle Guide Kit.
▸For the base, cut two apron pieces (4" x 18") and trim the ends at a 10-degree angle.
▸Cut four leg pieces (3-1/2" x 10") and trim the ends at a 10-degree angle.
▸Cut two short side leg supports (3-1/2" x 9").
▸Use the Milescraft PocketJig 400 to create pocket holes.
▸Secure pieces with the Milescraft Pocket Screw Kit 350 and the 3" Bench Clamp.
▸Sand all areas for smoothness.
▸Assemble the pieces and paint or stain to your liking.

Follow along with our easy-to-understand instructions and tips. Make sure to like, comment, and subscribe for more DIY projects and tutorials. Happy building!

--------------------------------------------------------------------------------------------------------------------------
Stay Connected with Milescraft!
Website: https://www.milescraft.com/
Instagram:   / milescrafttools  
Facebook:   / milescrafttoolspage