DIY Pooja Mandir

If you are looking to build your own Pooja Mandir, I have included all the major steps involved in this video, so that you can make one at home.

Most of the materials I purchased were from Lowes and Home Depot, and the cost was around $600.
Top:
Large Craft Oak Finial (1.75-in x 3.75-in) - 5
EverTrue 4-in x 8-ft White Hard Finished Egg and Dart Crown Moulding - 4
Ornamental Mouldings 1-1/2-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Ornamental Mouldings 3/4-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Gold Ceiling Cup Hooks Self-Tapping Screws
AzKrafts Lot 25 Brass Bells 1.13" H

Middle:
Waddell Ash Traditional End Table Leg (1.375-in x 28-in) - 4
Ornamental 2-1/2-in x 4-ft White Hard Unfinished Chair Rail Moulding - 2
Waddell 5504 3/4 in. x 2-1/4 in. x 48 in. Maple Rail Moulding - 1

Doors and drawers:
Ornamental Mouldings 13/32-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Ornamental Mouldings 2-1/4-in x 8-ft White Hard Unfinished Chair Rail Moulding - 2
MUXSAM Long Wood Onlays Detail Carved Appliques (2-Pack, 30x6cm/11.9"x2.4")
1/2-in x 2-ft x 4-ft Whitewood Sanded Plywood

Base:
1/2-in x 4-ft x 8-ft Whitewood Sanded Plywood - Cut into 4 pieces (2 x 4)
Ornamental Mouldings 1-in x 8-ft White Hard Unfinished Rope Chair Rail Moulding - For side trim
Maple Bun Feet Coffee Table Leg (2.75-in x 4-in)

Tools used:
ADMIRAL 10 in. 15 Amp Cast Aluminum Table Saw
Kreg Pocket Hole Jig®
Kreg #6 x 3/4-in Zinc-Plated Interior Pocket Hole Screws
Kreg #7 x 1-in Zinc-Plated Interior Pocket Hole Screws
Titebond II Premium Wood Glue Yellow, Interior/Exterior Wood Adhesive
Bosch 18-volt Power Drill Tool
CRAFTSMAN 7-1/4-in 9-Amp Single Bevel Compound Miter Saw
IRWIN QUICK-GRIP Assorted Mini One Handed Bar Clamp
Pneumatic 18-Gauge 2-1/8 in. Brad Nailer
6 Gal. Portable Electric Pancake Air Compressor
Minwax Wood Finish Oil-Based Gunstock Semi-Transparent Interior Stain
Minwax Clear Gloss Oil-Based Polyurethane
https://www.walmart.com/ip/Gold-Rust-...