💯💥❤️‍🔥👀Converted RC HENG LONG/AMEWI KING TIGER2 PORSCHETURM TK7.0BB/IR

💯💣💥🧐👀👉The RC KING TIGER 2 TK7.0 BB/IR 1:16 from AMEWI was converted to HENG LONG PORSCHETURM 1:16.
Furthermore,the drive axle support/made of ALU
with BRASS BEARING and an additional BALL
BEARING were inserted behind the DRIVE AXLE
SUPPORT on the FLOOR TRAY.
On the rear pulleys in the lower FLOOR PAN/
protruding fastening screws from the rear axles
for the deflection rollers, an aluminium reinforcement tube/diameter=6mm inserted/
clamped between the rear fastening srews of the
deflection rollers, and secured with special
adhesive.
Here,too,I drained the smoke module,sealed it,
soldered the plus and minus cables on the fan
motor,and re-soldered the smoke module's glow
wire to produce more powerful smoke.
The HENG LONG METAL-MG/LED was installed
on the PORSCHE TOWER and connected to the
circuit board.
Lastly,the original HENG LONG SPEAKER was
attached to a plastic box/to the floor pan with
hot glue,and then the speaker/HENG LONG was
glued to the plastic box with hot glue and also
screwed back on at the original fastening points.
This gives you a stronger/voluminous and louder
resonance body.
All other components,such as:armored chains,
rollers,drive and deflection rollers,Neylon/pladtic
gears etc.have remained original.
I hope you enjoy watching the VIDEO!
I would be very happy about LIKES and COMMENTS!
Leave a ABBO if you like my channel and so you don't miss my latest VIDEOS!

Music by Ronald Kah
Web:https://ronaldkah.de