Official Exaco Royal Victorian Greenhouse Assembly 2018 3D Version

2024 corrections: There is a new updated YouTube Video that will highlight the most recent changes to this greenhouse. Please go to    • How to install your Janssens Helios g...   to watch the updated YouTube Video.

Detailed animation of the assembly process for the Royal Victorian greenhouse series from Exaco Trading. To jump to specific chapters click the times listed below.

2023 corrections:
1)The video will say to use M6 x15 bolts. Please use the M6x12 bolts that come with the greenhouse.
2) The door support piece for the double sliding door at 37:27 is not included by the factory anymore.

00:00 – Foundation Frame
03:00 – Pro6578 Corner Wall pieces
03:51 – Wind Brace Bracket to corner
04:24 – Slider Loops per curtain
05:12 – Pro1456 Wall pieces
05:30 — Pro20229 for Double Sliding Door
06:00 – Center Post (Pro1456)
07:00 – Detail for VI36/VI46
07:53 – Detail for Louvre Window
08:34 – If you purchased curtains, now is a good time to install the curtain rails – refer to page SD1
09:25 – Roof Windows
10:15 — Window Roof Uprights
11:33 – Bending and attaching the 45-degree support tube
14:07 – Attaching the roof and wind braces
15:12 – Scroll Supports for VI36/VI46
18:24 – Insert glass windows/adding decorative finials
19:06 – Adding plastic gutter down spout/gutter profile frame
21:00 – Adding glass supports
22:15 – Adding Glass and Glazing shims to windows.
23:36 – Installing the rubber trim/trim plates
25:40 – Crescent seals for roof
31:26 – Adding/Assembling Single Sliding Door
37:24 – Adding/Assembling Double Sliding Door
42:34 – Adding Louvre Window
49:17 – Assembling the Roof Window
51:49 – Window Opener for Roof Window
56:38 – Spindle Opener for Roof Window


www.exaco.com