Скачать или смотреть Starter replacement, rusted & seized to engine. It’s Finally Out!!! (After 2 months of trying)

Part 3, This Starter had to be cut out of the engine, it was rusted and sized to the bell housing. While trying to to remove it with PB blaster, slide hammer, and heat, the starter snapped in half.

The half remaining in the bell housing would not release. It had to be cut out with an angler grinder and a rotary file

Most people would’ve given up on this vehicle but I really wanted to save a manual transmission from the crusher


2009 Toyota Matrix
2.4L 5 speed manual

#saved #5speed #diy #toyota


I’m going to put chapter breaks for every method i tried until i got the starter freed. Any of these would be useful for other stuck bolts or parts

Also im experimenting with 2 new editing programs, davinci resolve and Final Cut Pro. Over the next few months you’ll see me trying new things out on videos, trying to understand more professional editing software

00:00 intro
00:18 slide hammer on a short strap ( i got injured)
01:45 slide hammer with a long strap
04:37 Slide hammer, PB blaster, Kroil
07:24 Brake Caliper spreaders and slide hammer
08:30 Propane torch, PB blaster, Slide Hammer
10:30 Slide hammer with Vise grip
11:26 Angle Grinder with a rotary file
13:30 VICTORY!!!
15:45 Starter Installation
16:20 Recap