fischer DUOTEC

fischer DUOTEC

The installation-friendly nylon toggle plug
for high loads in gypsum plasterboard.

The small drill hole diameter allows installation with a standard
10 mm drill.

The short toggle element (39 mm) simplifies installation, even in
narrow and insulated cavities (≥ 50 mm).

If the drill hole hits solid construction, it is no problem, simply
carry on as the DUOTEC acts as an expansion plug.

The toggle element, made from a combination of glass-fibre
reinforced plastics (hard/soft) causes a considerably higher
load-bearing capacity and load distribution in panel construction
materials compared to standard plastic solutions, without
damaging the gypsum plasterboard.

The white flange sleeve made from glass-fibre reinforced plastic
increases the shear load-bearing capacity, thereby ensuring
additional security.

The flexible, stainless steel screw attachment (stainless steel A2)
facilitates the use of chipboard screws or metric and threaded
rods with lock nuts in different diameters.