1971 Plymouth 'cuda - Data Logger project update - Vital Stats - First Complete System

1971 Plymouth 'cuda - Data Logger project update - Vital Stats - First Complete System

In this video I cover the 3D printed case, 3rd revision of the PCB, connectors and some sensors. At this point it is bench tested and ready to mock up in the engine bay as well as start the process of designing the cable layout.

Here are the links to the tools and connectors I used -

21-way AHDP pin connector -
https://www.waytekwire.com/catalog/co...

21-way AHDP socket connector
https://www.waytekwire.com/product/am...

The crimp tool I used - https://www.amazon.com/gp/product/B0C...

I used a combination of size 16 and size 20 solid terminal pins and sockets -
Size 20 -
https://www.amazon.com/gp/product/B09... https://www.amazon.com/gp/product/B0C...

Size 16 -
https://www.amazon.com/gp/product/B0C...

For the connections at the sensor I used JRready 2 and 3 pin connectors depending on what was needed and the AWG used on the sensor
https://www.amazon.com/gp/product/B09...
https://www.amazon.com/gp/product/B0B...
https://www.amazon.com/gp/product/B09...
https://www.amazon.com/gp/product/B0B...

Since none of us are perfect and you are going to make a mistake, this is to pin-extractor tool set I used -
https://www.amazon.com/gp/product/B0B...

I bought these as needed, if I had planned a little better I see there are kits that include the crimp tool and extractor set. It might have been cheaper as a set. I just didn't want to buy stuff I didn't need so only bought what I needed.

#mopar #barracuda #cuda #ebody #nonamenationals #diy #carrestoration #datalogger #arduino #stone-tech #hmi