#EvenEmbers #GasGrill #GrillAssembly
The video covers the complete unboxing and assembly of an Even Embers four-burner gas grill. If you have bought one of these grills and feel overwhelmed at putting the grill together, this video is your answer. In addition, look below for a view of detailed timestamps to find a particular area you need help with assembling your grill.
Here is the link for the grill that can be purchased at Tractor and Supply.
https://www.tractorsupply.com/tsc/pro...
1. From 00:00 to 00:15 is the YouTube Even Embers assembly video introduction.
2. From 00:16 to 00:37, the grill box is shown before unpacking.
3. From 00:38 to 05:33, the box is opened, and the main contents are removed.
4. From 05:34 to 06:15, the owner's manuals are opened for a brief overview.
5. From 06:16 to 07:57, a smaller box containing the grill doors, grill base, rear grill panel, and heat tents is opened.
6. From 07:58 to 09:41, the next smaller box is opened that conceals the side shelves, casters, and door handles.
7. From 09:42 to 10:50, the box is opened that contains the sides of the grill.
8. From 10:51 to 13:29, step number one takes place, which is installing the door handles.
9. From 13:30 to 15:53, step number two occurs where the grill's right and left side panels are installed.
10. From 15:54 to 19:00, step number three is done, consisting of installing the rear cart panel and tightening the back panel screws.
11. From 19:01 to 19:28, the door pins are secured before turning the grill base upside down.
12. From 19:29 to 22:51, the cart base is installed that covers steps four and five in the instruction manual.
13. From 22:52 to 26:56, the wheel caster's step number six in the manual takes place.
14. From 26:57 to 28:10, steps seven and eight are done. Step seven is the tightening of the cart base screws, and step eight is installing the tank block bar.
15. From 28:11 to 30:13, step number nine is shown installing the doorstop.
16. From 30:14 to 32:23, step number ten involving loosening and removing screws from the grill body occurs to prepare the grill body.
17. From 32:24 to 37:03, the grill body is installed on the grill base covering steps eleven and twelve.
18. From 37:04 to 39:07, step number thirteen shows installing the front panels on the side shelves.
19. From 39:08 to 41:58, the side shelf is installed on the grill that does not have the side burner.
20. From 41:59 to 44:29, the side shelf with the side burner is installed. At this point, steps fourteen to nineteen are completed.
21. From 44:30 to 49:18, the side burner nozzle and venturi are assembled that cover steps twenty to twenty-three.
22. From 49:19 to 50:50, the handle is shown being installed on the grease tray, which is step twenty-four in the manual.
23. From 50:51 to 51:18, the grease tray and cup are slid into the grill covering step number twenty-five.
24. From 51: 19 to 52:48, step number twenty-six is done, installing the heat tents and grates.
25. From 52:49 to 54:50, the propane tank is hooked up and on main burner and the side burner are ignited.
Информация по комментариям в разработке