Скачать или смотреть HTG Grinder Gearbox Oil Change - A quick Guide

Maintain your grinder’s performance and extend the life of your gearbox with this clear and practical oil change guide. In this video, we walk you through the essential steps to safely drain and refill the gearbox oil on HTG grinders, ensuring proper sealing, alignment, and contamination-free operation.

🔧 Main Steps Covered in This Video

1. Remove Plate – Access the top opening of the gearbox

2. Align Screw – Rotate the gearbox plates to align the lower screw

3. Remove Screw – Extract the upper screw with its O-Ring

4. Drain Oil – Safely remove the used oil for 5–10 minutes

5. Realign Refill Opening – Align both openings again for refilling

6. Refill Oil – Pour the recommended amount in controlled stages

7. Close Up – Reinstall screws and close the top plate

This procedure is essential to avoid leaks, prevent dust or debris contamination, and maintain optimal machine performance. If the video appears blurry at first, please allow the file to finish loading to view it in full resolution.

📄 Download the Oil Capacity Chart: https://drive.google.com/file/d/1Z5P4...

For the exact oil volume required for your specific grinder model, download the official chart using the link below.

At PHX | HTG NA, we are committed to delivering solutions that increase performance, innovation, and the operational efficiency of our clients and partners. We’re here to support your workflow with reliable tools, training, and resources designed for real jobsite conditions. We offer also this service