ABS Filament Review - 3D Printing - Acetone Vapour Smoothing

Delta Wasp 2040 3D Printed objects in ABS filament. Recommended printing and bed temperature. Acetone Vapour Smoothing.
ABS compared to other filaments demands more attention in the very beginning. It doesn't stick to bed as well as PLA for example. This can be improved by raising the bed temperature up to 100C (212F) or/and apply extra strong solution on the printing bed. We use Pritt extra strong glue on our glass bed. ABS is usually printed at 240C (464F). During printing heated ABS smells badly. The fumes are considered toxic so the room must be ventilated well...

Check box made of tin for acetone vapour smoothing:
   • 3D Printed - Dual Business Card Case ...  

Blog, images and STL files:
https://3dwithus.com/abs-acetone-smoo...
https://3dwithus.com/abs-filament

ABS filament used in this video: Rigid.ink

Amazon Affiliate Links:
3D Printing Tool kits: https://amzn.to/35xqL7S
ABS Filament: https://amzn.to/3jTZlNJ
Disclosure: At no additional cost for you we will receive a commission if a purchase happens.

STL files:
thing:366813
thing:27050

Join Us!
Create With Us - Write With Us - 3D With Us
  / 3dwithus  
  / 3dwithus  
  / 3d_with_us  
  / 3dwithus  
https://www.pinterest.co.uk/3dwithus
https://www.3dwithus.com