Kenney: Double Curtain Rod Installation

In this video we walk you through the steps in which you need to take to install your Kenney Double Curtain Rod in your home. Using the hardware that is included with your product, follow the instructions below for a proper and secure installation.

1 - Mark the location where you will mount the brackets.
2 - Remove the decorative and cap finials the rods.
3 - Remove the plastic shipping caps from the extender rods.
4 - Mount the left, center and right brackets to the wall.
5 - Shirr curtains onto the extender rod.
6 - Using the middle bracket to stabilize the rod, place the collar at the end of the rod and screw in the cap finial.
7 - Push the rod together so it is not through the middle bracket and put on the lock collars.
8 - Shirr the other curtain on to the other rod and use the outer bracket to support the rod while you connect them.
9 - Place the collar at the end of the rod and screw on the cap finial.
10 - Find your desired length and tighten the lock collars using the provided Allen wrench.

Repeat steps 5-10 to assemble the other rod sections.